Description
CNC Milled Golf Wedge 52 56 60 — PGM SG010 | FairwayWise
The PGM SG010 is a CNC-milled stainless steel wedge available in three lofts: 52 degree gap, 56 degree sand, and 60 degree lob. Stainless body resists rust.
CNC grooves generate spin. Low CG helps launch from sand and rough. At this price, you’re getting a milled-face wedge for what most brands charge for a basic cast model.
Budget wedges have one reputation problem: grooves that wear out and distance control that falls apart. The SG010 tackles both.
CNC-milled grooves. Stainless steel that won’t rust. For a golfer building their first wedge set or replacing worn clubs, this is where value meets function.
Specifications at a Glance
MaterialStainless SteelRust-resistant — won’t develop raw steel patina
FaceCNC-Milled GroovesMachined, not cast — consistent spin
Lofts52 / 56 / 60 DegreesGap, Sand, Lob — full short game coverage
ColorsBlack / Pink
CNC-Milled Grooves — Spin Comes From the Face
Cast wedges pour grooves from a mold. The edges are slightly rounded before you even hit a ball. CNC-milled grooves are cut by a machine. Sharper edges.
Identical spacing. More friction at impact. More spin. More green-side control.
Wedge grooves wear out. That’s physics. Every wedge loses spin as the grooves dull.
The difference is where they start. The SG010’s CNC grooves begin sharper than cast alternatives at this price. They’ll still wear over 75-100 rounds. But the baseline is higher.
But here’s the thing. At this price, you can replace all three wedges for less than one premium wedge. Groove wear stops being a financial crisis.
It becomes a planned upgrade. Rotate a fresh wedge in every season or two. Your short game stays sharp. Your wallet stays intact.
Stainless Steel — No Rust, No Drama
Raw carbon steel wedges rust intentionally. Some like the look. For everyone else, rust is just rust. It doesn’t improve spin.
It stains your bag. Stainless doesn’t rust. Wipe it down after a round. Same as day one.
The low CG helps from sand and thick rough. Weight positioned lower gets under the ball more easily.
Less digging. More launching. For high handicappers fighting fat wedge shots, a low-CG wedge forgives more than a tour blade.
Which Loft Do You Need?
- 52 degree (Gap) — Fills the yardage between PW and SW. Full swings from 80-110 yards.
- 56 degree (Sand) — The do-everything wedge. Bunkers. Pitches. Chips. If you only buy one, buy this.
- 60 degree (Lob) — High soft shots over hazards. Specialty club. Add after the 56.
Frequently Asked Questions
Q1: How long do CNC-milled grooves last?
A: 75-100 rounds of optimal spin — same as any wedge. The SG010 starts sharper than cast because the grooves are cut, not molded. Replace when spin drops.
Q2: Will stainless steel rust?
A: No. Unlike raw carbon steel, stainless is corrosion-resistant. Wipe after wet rounds and it stays clean.
Q3: What’s the difference vs a $150 premium wedge?
A: Premium wedges offer multiple bounce and grind options plus softer forged feel. The SG010 has one bounce profile and firmer stainless. For 15+ handicappers, the gap is narrower than the price suggests.
Q4: Which loft should a beginner buy first?
A: 56 degree sand wedge. Most versatile — bunkers, pitches, chips.
Master one wedge. Add the 52 and 60 later.
Q5: Can these be used for full swings?
A: Yes. The 52 is ideal for 80-110 yards.
The 56 works for full and partial. The 60 is best for partial shots.
Reviews
There are no reviews yet.